ENG
Our range of AFP and ATL machines are designed for flexibility, easy of use, and scale.
Each head has Multi-Material capabilities and a range of configuration options. So, whether you’re starting out in R&D setting and need a budget-scale solution, or entering into serial production and need high-reliability units, our work-cells will have you covered.
They are re-configurable and upgradeable. We help you choose an initial configuration that is suited to scale and will not hold you down as you grow your presence on the market.
Automated Fiber and Tape Placement with Performance / Price you can count on
- Key Benefits
- Cell Configurations
- AFP Technical Specifications
- ATL Technical Specification
- Options for AFP & ATL Cells
Key Benefits
- Multi-material AFP heads for Thermoset, Thermoplastic and Dry-fiber layup
- Quick change IR and Laser heating
- Automated Head Exchange in <2 mins
- Fast Bi-directional layup
- In-process Layup Inspection System (IPLIS)
- Leading thermoplastics layup with in-situ consolidation from closed loop feedback
- First on market with dual-robot thermoplastics layup capability
Cell Configurations
- Robot, Gantry(High-rail),Low-railPortal, and Column configurations, with and without enclosures
- Lab-scale and industrial size equipment for serial production
- Combine other functions on same work-cell for maximum productivity and higherROI
- Custom designs and functions available
AFP Technical Specifications
- AFP with4, 8, 16 or more tows
- Tow widths:¼”,½”or 1”
- Single-tape AFP from¼”up to 2” tapes
- Thermoset, thermoplastics and dry-fiber
- Maximum layup speed: 80 m/min*
- Cut-and-restart repeatability:±2.5mm*
- Course placement accuracy:-0/+2.5mm*
- Minimum cut/restart distance: <=10mm*
- Minimum course length: 120mm*
- IR from 1kW up
- Laser heating: 3, 4, 6kW or more
- IR and Visual process cameras
*Depending on material, cell configuration, controller, tool geometry and maximum layup speedGuaranteed reliability for serial production
ATL Technical Specification
- ATL up to 300mm (12”)wide tape
- Widths: 50mm (2”), 75mm (3”), 150mm (6”), 300mm (12”)
- Dual ultrasonic knife contour cutting
- Pre-layup defect detection
- Patented ATL Head
Options for AFP & ATL Cells
- Robot Linear and Tool Rotational axes
- Bar-code readers and factory integration
- Laser Projection and In-line Inspection Systems
- Ultrasonic trimming capability
AFP & ATL Models to Choose
Discovery
- Multi-material R&D configuration
- Manual head exchange
- High reliability
- Kuka Fortec or similar Robot only
- Multi-tow or Single tow AFP
Libra
- Starter production unit and advanced R&D setup
- Kuka Quantec or similar Robot
- High- or low-rail Gantry
- AFP with 8, 16 or more tows
- ATL 50-150mm
- Automated Head Exchange
Taurus
- High-performance AFP and ATL unit for production configuration
- Kuka Titan or similar Robot
- High- or low-rail Gantry
- AFP with 8, 16 or more tows
- ATL up to 300mm
- Automated Head Exchange
- High-reliability unit for maximum performance
Not sure which unit is right for you?
Need special requirements or capabilities?
Review the table below and contact us for more in-depth discussion.
Product Comparison
DISCOVERY
LIBRA
TAURUS
ROBOT
Yes
Yes
Yes
GANTRY, LOW-RAIL PORTAL, or COLUMN
No
YES
YES
AFP AND ATP
Single tape 2″ or 4x 1/4″
4, 8x 1/4″
8, 16, 24x or custom 1/4″
ATL
50 TO 150MM
75 TO 300MM
HEATING SYSTEM
-IR
-LASER
– 800W
– 2KW
– 1KW
– 4 TO 6KW
– 2KW
– 4 TO 12KW+
HEAD EXCHANGE
MANUAL
AUTOMATIC
AUTOMATIC
QUALITY CONTROL SYSTEM
BASIC
PREMIUM
PREMIUM
IPLIS – INSPECTION
NO
YES, OPTIONAL
YES, OPTIONAL
Automated Head Exchange
Reduce Downtime. Increase Productivity and Utilization.
Mikrosam’s Multi-material AFP and ATL units have had fast automatic head exchange capability for number of years.
Less than 3 minutes to switch from AFP or ATL to another head.
This reduces your downtime and improves productivity. Works with any cell or head/end-effectors.
Our Software
Modern NURBS platform for simulation and programing of AFP & ATL machines
- CATIA Compatible
- Import/Export to standard formats such as IGES, STEP, NASTRAN, SolidWorks,etc.
- Generates layup on mandrel shapes
- Sophisticated layup algorithms and attributes
- Organization of plies and courses
- Analysis of layup and many more feature
Software for Offline Analysis, Programming and Simulation for Filament Winding
- Mandrel generation
- Winding pattern development
- Geodesic and non-geodesic winding path development
- Winding pathand patternsimulation
- Post-processing
- Control data generation
Continuous improvement via data monitoring and traceability
- Comprehensive and Custom Quality Control System for Online and Offline Tracking and Reporting of CompositeManufacturing
- Data Acquisition and data management hardware & software
- Product & Program data, Raw material consumption, Operation and process time
- Process speed, temperature, Compaction pressure, Tension monitoring
- History data for every manufactured part
- Possibility to include additional data on customer request.
News & Events
08.04.2026
Why high-rate manufacturing of thermoplastics? Our Chief Revenue Officer, Vele Samak, joined the JEC TV guest panel to tackle this question alongside industry leaders Arnt…
Mikrosam will showcase its latest developments in affordable Automated Fiber Placement (AFP) and in-house prepreg slitting and rewinding technologies at JEC World 2026. Visitors can…
We are proud to announce that Mikrosam has been awarded the esteemed "3rd November" award for 2025 by the Municipality of Prilep. This distinguished award…
Mikrosam’s participation at the Western Balkans Human Capital Days in Tirana showcased Macedonia’s leadership in advanced automation and skills development for the future workforce. On…
28.09.2025
This Saturday, September 27, Prilep hosted a special celebration marking two major anniversaries – 16 years since the founding of the Institute for Advanced Composites…
Stefani Nedelkova Kuzmanoska - Marketing & PR Manager Vele Samak - Chief Revenue Officer In the fast-evolving world of composite manufacturing, automation is no longer…